Have you ever experienced the bothersome problem of needing to turn off your air conditioner just since the fan in it is not working? You can try to shut down it manually or you may use the handy switch supplied with your unit. On the other hand, if you are in a position to find the issue and fix it, what can you do? The very best way to handle this situation is to call up a company specializing in electric components and ask them for help about how to begin replacing the sections of your system.
Electric Fan Repair
Some companies may give you to come back and do the job for you while some might even send out a technician. If you would like to save money on the costs of hiring professionals, then you can just check around and gather all the essential parts necessary for the replacement of this fan. When you have the essential things, you can contact the company that you purchased them from to find the parts sent to you for installation.
Electric Fan Repair
If you would like to prevent spending much time and effort on the task of replacing your lover, you may simply hire someone from a reputable air conditioning unit parts supplier to perform the job for you. However, if you have experience in managing electrical components, it may be easier for you to deal with the job yourself. Below are a few tips that will aid you with the repairs. Read on.
Electric Fan Repair
Before starting the procedure, you have to make certain you have replaced all of the electrical components of the body like the thermostat, compressor, refrigerant hoses, etc. It is also essential for you to check the circuit breaker if it is not working properly. Check also the wires as well as the fuses if they continue to be in good condition. After doing so, you should plug in all the fans that you have into the wall outlets and turn them to check if they are working correctly. If any of the fans create a hum, you have to open all the fuses and cables to determine whether the noise is moving away.
Electric Fan Repair
If everything looks good and the noise is still there, you can proceed with the electric fan repair. But you need to ensure you are prepared with the replacement part since this may vary from the initial one that was ruined. If you have read the directions properly, you can replace the fan without having to get anyone else’s help. The following are some tips that you could follow in replacing the fan.
- First of all, you want to remove the shell of this old enthusiast. After that, take off the screws that can be found either on the side or the bottom. Also, you need to start looking for a replacement bulb since this may also be damaged. You can replace the bulb by adding the end of the plug through the hole in the bulb and screw it in position. Do not forget to read the directions on how to do so.
Following that, you also need to disconnect the electrical cord that’s connected to the wires of the fan. Remove all the wires to be certain they are already straightened. To prevent any complication, you need to secure the electrical fan to something sturdy as a table or a seat before you’re likely to separate the wires from the fan.
Following that, it is possible to take off the screws or the bolts which are holding the new bulb set up in the old fan. It’ll be easier for you to access the bulb after you’re done removing it. Set the replacement bulb inside the old one and screw them back into place. The screws that are holding the wires in place should be taken off. Following that, you can reconnect the wires to their proper places.